FlexIt Success

Skip to Main Content »

Your shopping cart is empty



Welcome to Laser Jump Start!
Your home for Laser software, templates, and consumable
materials to Jump Start your Laser Engraving Opportunities!

208-697-5587

aubrey@laserjumpstart.com

“…I pre-finished the wood with a coat of General Finishes Wood Turners finish, then sanded to 220 grit and did a Beall buff treatment before cutting.  My wife is OK with this one for the moment… I’ll make a ‘real’ one for another lamp out in the living room sometime this weekend after hitting the store for more birch ply.” Feedback from Duncan in Maryland.

 

“Here’s yesterday’s round box test project done in inexpensive 5mm maple/birch plywood, with the outside (maple) buffed and waxed.  Interior is unfinished.  Seven inches OD, 4 inches high, 22 side segments, with an effective 3 1/2 inch useable space under the lip.  As noted, absolutely no issues with FlexIt in either design or cutting…” Feedback from Duncan in Maryland.

 

It makes really fun to work with FlexIt and BoxIt. Today I ordered the BoxIt upgrade and told my wife. She was directly thinking about a new hand bag and shoes. But I said, please wait may be that I can make it with BagIt or ShoeIt.” Posted on Laser Jump Start’s Facebook Page by Klaus in Germany.

 

“My new Lighthouse, designed with FlexIt. It’s 64 cm high”. Also shown is Klaus’s first FlexIt product, a FlexIt Cone. Feedback from Klaus in Germany.

"Glasses rack plus design time on just this job will have paid for both BoxIt and FlexIt :-)  Not bad for a garage hobby shop and occasional sale." Feedback from Duncan in Maryland.

"I've sold them the odd few wine racks, gift baskets, display boxes, and most recently wine bottle presentation boxes...one for a three-bottle whiskey sampler, the other for a standard 750 ml wine bottle, 3.5 inches square inside, 12 inches tall...both in 3mm Baltic birch." Feedback from Duncan in Maryland.


"I also used FlexIt to build a dust shoe for my CNC-router. So you can see that there is a lot of potential in this great tool." Feedback from Klaus in Germany.